REAR SEAT ASSEMBLY(for Wagon) REMOVAL

PROCEDURE


  1. REMOVE REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    A004TDJ

    1. Detach the 2 front hooks of the seat cushion from the vehicle body.

      Note

      Follow the instructions below carefully as the cushion frame deforms easily.


      1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

      2. Repeat for the other hook.

    2. Detach the 2 rear hooks of the seat cushion from the seatback.

      Note

      Be careful not to damage the vehicle body.

  2. REMOVE REAR SIDE SEATBACK ASSEMBLY LH

    A004P9F

    1. Remove the bolt and disconnect the rear seat 3 point type belt anchor.

    2. A004Q46

      Using a screwdriver, detach the claw to open the cap of the rear seat shoulder belt guide.

    3. Remove the seat belt from the belt guide.

    4. A004PHA

      Remove the bolt, and then remove the side seatback LH as shown in the illustration.

  3. REMOVE REAR SIDE SEATBACK ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. REMOVE REAR SEATBACK ASSEMBLY LH


    1. A004TDY

      Remove the 2 clips and fold back the carpet as shown in the illustration.

    2. Remove the 2 bolts and seatback.

  5. REMOVE REAR SEATBACK ASSEMBLY RH

    A004UDH

    1. Remove the bolt and disconnect the rear center seat outer belt anchor.

    2. A004QXG

      Remove the 2 clips and fold back the carpet as shown in the illustration.

    3. Remove the 2 bolts and seatback.

  6. REMOVE NO. 1 QUARTER WHEEL HOUSE GUSSET SUB-ASSEMBLY

    A004MO7

    1. Remove the 6 bolts and gusset.

  7. REMOVE REAR SEAT CUSHION LOCK HOOK

    A004N0L

    1. Detach the 4 claws and remove the 2 lock hooks.

  8. REMOVE REAR CENTER SEATBACK HINGE SUB-ASSEMBLY

    A004PND

    1. Remove the 2 bolts and center seatback hinge.

  9. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH

    A004RTT

    1. Remove the bolt and seatback hinge.

  10. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.