FRONT SEAT OUTER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY

    A004QDE

    1. Align the claw with the adjuster positioning hole and install the adjuster with the 2 bolts.

      Tech Tips

      First install the lower bolt, and then install the upper bolt.

      Torque:
      421 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH


    1. A004UAGE01
      Text in Illustration
      *a Bolt A
      *b Bolt B

      Attach the 2 guides and temporarily install the front seat outer belt assembly LH with the 2 bolts.

    2. Tighten the 2 bolts in the order shown in the illustration.

      Torque:
      for bolt A
      12.5 N*m  { 127 kgf*cm, 9 in.*lbf }
      for bolt B
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    3. A004MYEE03
      Text in Illustration
      *1 Locking Button

      Connect the pretensioner connector and lock the locking button as shown in the illustration.

      Note

      Securely lock the locking button.

    4. A004TGY

      Connect the shoulder anchor of the front seat outer belt assembly LH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  3. INSTALL CENTER PILLAR GARNISH LH

    Click here

  4. INSTALL LAP BELT OUTER ANCHOR COVER

    Click here

  5. INSTALL LOWER CENTER PILLAR GARNISH LH

    Click here

  6. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  7. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable some systems need to be initialized after the cable is reconnected Click here.