FRONT SEAT INNER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)


    1. for Manual Seat:


      1. A004TRLE01
        Text in Illustration
        *1 Protruding Part

        Install the front seat inner belt assembly LH with the nut.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster assembly LH.

      2. A004R50

        Attach the 2 clamps to connect the wire harness.

      3. Install the screw.

      4. A004P9I

        Attach the claw to connect the connector.

      5. Attach the 2 wire harness clamps.

      6. Connect the connector.

    2. for Power Seat:


      1. A004TRLE01
        Text in Illustration
        *1 Protruding Part

        Install the front seat inner belt assembly LH with the nut.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster assembly LH.

      2. A004R50

        Attach the 2 clamps to connect the wire harness.

      3. A004QM9

        Install the screw.

      4. Attach the claw to connect the connector.

      5. Attach the 2 wire harness clamps.

      6. Connect the connector.

  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)


    1. for Manual Seat:


      1. A004OVFE01
        Text in Illustration
        *1 Protruding Part

        Install the front seat inner belt assembly RH with the nut.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster assembly RH.

      2. A004N0G

        Attach the 2 clamps to connect the wire harness.

      3. A004PCP

        Install the screw.

      4. Attach the claw to connect the connector.

      5. Attach the 2 wire harness clamps.

      6. Connect the connector.

    2. for Power Seat:


      1. A004OVFE01
        Text in Illustration
        *1 Protruding Part

        Install the front seat inner belt assembly RH with the nut.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster assembly RH.

      2. A004N0G

        Attach the 2 clamps to connect the wire harness.

      3. Install the screw.

      4. A004NZU

        Attach the claw to connect the connector.

      5. Attach the 2 wire harness clamps.

      6. Connect the connector.

  3. INSTALL SEAT SLIDE POSITION SENSOR PROTECTOR


    1. for Manual Seat:

      Install the seat slide position sensor protector Click here.

    2. for Power Seat:

      Install the seat slide position sensor protector Click here.

  4. INSTALL FRONT SEAT ASSEMBLY LH

    Tech Tips

    Use the same procedure described for the RH side.


    1. for Manual Seat:

      Install the front seat assembly LH Click here.

    2. for Power Seat:

      Install the front seat assembly LH Click here.