LUMBAR SWITCH(for Manual Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL LUMBAR FRONT POWER SEAT SWITCH


    1. A004Q55

      Install the lumbar front power seat switch with the 2 screws.

  2. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  3. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  4. INSTALL VERTICAL ADJUSTING HANDLE LH

    Click here

  5. INSTALL VERTICAL SEAT ADJUSTER KNOB CAP

    Click here

  6. INSTALL FRONT SEAT ASSEMBLY

    Click here

  7. CHECK SRS WARNING LIGHT

    Click here

  8. INSPECT FRONT SEAT ASSEMBLY


    1. Check the lumbar support operation.


      1. Operate the lumbar front power seat switch and check that the lumbar support moves in both directions.

    2. Check the seat heater operation.


      1. Turn the ignition switch to ON.

      2. Operate the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.