REAR AXLE HUB INSTALLATION

PROCEDURE

1. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY LH

   
   

   1. 

      Install the rear axle hub and bearing assembly with the 4 bolts.

      Torque:

      90 N*m  { 918 kgf*cm, 66 ft.*lbf }

2. CONNECT SKID CONTROL SENSOR WIRE

   Click here

3. INSPECT REAR AXLE HUB BEARING LOOSENESS

   Click here

4. INSPECT REAR AXLE HUB RUNOUT

   Click here

5. INSTALL REAR DISC

   Click here

6. INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY LH

   
   

   1. Install the rear disc brake cylinder assembly Click here.

7. INSPECT REAR WHEEL ALIGNMENT

   
   

   1. Inspect the rear wheel alignment Click here.

8. CHECK SPEED SENSOR SIGNAL

   
   

   1. Inspect the speed sensor signal Click here.