TRANSMISSION CONTROL CABLE REMOVAL

PROCEDURE


  1. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. Remove the front exhaust pipe assembly Click here.

  2. REMOVE RADIATOR SUPPORT OPENING COVER

    Click here

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. REMOVE BATTERY CLAMP SUB-ASSEMBLY

    Click here

  5. REMOVE BATTERY

  6. REMOVE BATTERY TRAY

  7. REMOVE BATTERY CARRIER

    Click here

  8. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  9. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  10. REMOVE AIR CLEANER CASE

    Click here

  11. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  12. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR

    A004RCG

    1. Remove the 3 nuts and front No. 1 floor heat insulator.

  13. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A004OIS

      Remove the 2 clips and disconnect the 2 cables from the transaxle.

    2. A004UCR

      Remove the 2 clips and disconnect the 2 cables from the control cable bracket.

    3. A004RN0

      Remove the bolt and detach the bracket of the control cable assembly.

    4. A004N8M

      Remove the 2 nuts and detach the grommet of the control cable assembly.

    5. A004S38

      Remove the clip and disconnect the end of the select control cable.

    6. A004OZ1

      Remove the clip and the end of the shift control cable.

    7. A004MJV

      Detach the claws and remove the control cable assembly.