PARK / NEUTRAL POSITION SWITCH REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER

    Click here

  2. REMOVE AIR CLEANER CAP AND HOSE

    Click here

  3. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  5. REMOVE FUEL FILTER SUPPORT

    A004SO2

    1. Disconnect the connector and detach the 2 wire harness clamps and connector clamp, and then disconnect the engine wire from the fuel filter support.

    2. Remove 2 nuts and disconnect the fuel filter assembly.

    3. A004O70

      Detach the connector clamp from the fuel filter support.

    4. Remove the 4 bolts and fuel filter support.

  6. REMOVE AIR CLEANER BRACKET

    A004PJG

    1. Remove the 3 bolts and air cleaner bracket.

  7. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

    A004SCY

    1. Move the shift lever to N.

    2. Remove the nut and disconnect the control cable from the control shaft lever.

  8. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. Disconnect the park/neutral position switch connector.

    2. A004RG4

      Remove the nut, washer and control shaft lever from the control shaft.

    3. A004OS8

      Remove the 2 bolts and pull out the park/neutral position switch to remove it from the control shaft.