POWER SEAT SWITCH INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT POWER SEAT SWITCH LH


    1. B0040KI

      Install the front power seat switch LH with the 3 screws.

    2. Connect the connector.

  2. INSTALL FRONT SEAT CUSHION SHIELD LH WITH FRONT SEAT NO. 1 INNER CUSHION SHIELD

    Click here

  3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Click here

  4. INSTALL RECLINING POWER SEAT SWITCH KNOB

    Click here

  5. INSTALL FRONT SEAT ASSEMBLY

    Click here

  6. CHECK SRS WARNING LIGHT

    Click here

  7. INSPECT FRONT SEAT ASSEMBLY


    1. Check the power seat operation Click here.

    2. Check the seat heater operation.


      1. Turn the ignition switch to ON.

      2. Operate the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.