AIR FUEL RATIO SENSOR INSTALLATION

PROCEDURE


  1. INSTALL AIR FUEL RATIO SENSOR


    1. A0054UXE05
      *1 Fulcrum Length

      Using SST, install the sensor to the exhaust manifold.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips

      Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

      Note

      Do not damage the sensor.

    2. A0057L9

      Connect the sensor connector and clamp.

  2. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here

  3. INSTALL OUTER COWL TOP PANEL

    Click here

  4. INSTALL FRONT WIPER MOTOR AND LINK


    1. Install the front wiper motor and link Click here.