FRONT BUMPER DISASSEMBLY


  1. REMOVE NO. 4 ENGINE ROOM WIRE


    1. except Sport Package:


      1. Disconnect the 6 connectors.

      2. Detach the 7 clamps and remove the No. 4 engine room wire.

        A01H235
    2. for Sport Package:


      1. Disconnect the 6 connectors.

      2. Detach the 11 clamps and remove the No. 4 engine room wire.

        A01H20C
    3. A01GW2L

      Detach the 2 claws and remove the clip.

      Tech Tips

      Use the same procedure to remove the clip on the other side.

  2. REMOVE NO. 1 ULTRASONIC SENSOR


    1. A01H08G

      Remove the 6 No. 1 ultrasonic sensors as shown in the illustration.

      Note


      • Be careful not to damage the retainer.

      • Do not forcibly remove the retainer from the bumper cover.

  3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER


    1. A01GWDX

      While heating the retainer using a dryer, pull the retainer lightly and remove the double-sided tape. Then remove the 4 No. 1 ultrasonic sensor retainers.

      Heating temperature
      40 to 60°C (104 to 140°F)

      CAUTION:

      Be careful of burns.

    2. Using a cloth or non-residue solvent, wipe off any tape residue on the bumper cover.

  4. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER


    1. A01GWDX

      While heating the retainer using a dryer, pull the retainer lightly and remove the double-sided tape. Then remove the 2 No. 2 ultrasonic sensor retainers.

      Heating temperature
      40 to 60°C (104 to 140°F)

      CAUTION:

      Be careful of burns.

    2. Using a cloth or non-residue solvent, wipe off any tape residue on the bumper cover.

  5. REMOVE HEADLIGHT CLEANER WASHER NOZZLE COVER


    1. A01GW90

      Extend the headlight washer nozzle.

  6. REMOVE HEADLIGHT CLEANER HOSE


    1. except Sport Package:


      1. Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly LH.

        A01GX1P
      2. Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly RH and drain the washer fluid.

      3. Detach the 9 clamps and remove the headlight cleaner hose.

    2. for Sport Package:


      1. Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly LH and drain the washer fluid.

        A01GYG7
      2. Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly RH and drain the washer fluid.

      3. Detach the 9 clamps and remove the headlight cleaner hose.

  7. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH


    1. A01H1HA

      Remove the screw and headlight washer actuator sub-assembly LH.

    2. Detach the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration.

      A01GWOT
    3. A01GXUD

      Remove the spring nut from the headlight washer actuator sub-assembly LH.

  8. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. REMOVE ULTRASONIC SENSOR RETAINER

    A01GZLG

    Tech Tips

    Use the same procedure for both ultrasonic sensor retainers.


    1. Remove the ultrasonic sensor retainer.

  10. REMOVE ULTRASONIC SENSOR CLIP

    A01H1GV

    Tech Tips

    Use the same procedure for both ultrasonic sensor clips.


    1. Remove the ultrasonic sensor clip.

  11. REMOVE WASHER BRACKET

    Tech Tips


    • Use the same procedure for the RH and LH sides.

    • The procedure listed below is for the LH side.


    1. A01H1YI

      except Sport Package:


      1. Remove the washer bracket from the front bumper together with the double-sided tape.

        Note


        • If the double-sided tape remains on the bumper, remove it completely.

        • The headlight cleaner bracket is a nonreusable part.

    2. A01H1SS

      for Sport Package:


      1. Remove the washer bracket from the front bumper together with the double-sided tape.

        Note


        • If the double-sided tape remains on the bumper, remove it completely.

        • The washer bracket is a non-reusable part.

  12. REMOVE FOG LIGHT ASSEMBLY LH


    1. except Sport Package:

      Click here

    2. for Sport Package:

      Click here

  13. REMOVE FOG LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  14. REMOVE FOG LIGHT COVER LH


    1. except Sport Package:


      1. Detach the 5 claws and remove the fog light cover LH.

    2. for Sport Package:


      1. Remove the screw.

      2. Detach the 9 claws and remove the fog light cover LH.

        A01GZCSE01
        Text in Illustration
        *A except Sport Package *B for Sport Package
  15. REMOVE FOG LIGHT COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  16. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET


    1. for Type A:


      1. Remove the 2 screws and front bumper extension mounting bracket.

        A01GY6DE01
        Text in Illustration
        *A except Sport Package *B for Sport Package
    2. A01H0S3

      for Type B:


      1. Remove the 2 screws and front bumper extension mounting bracket.

  17. REMOVE FRONT BUMPER LOWER COVER


    1. Detach the 2 claws and front bumper lower cover.

    2. Rotate the cover forward as shown in the illustration.

      A01GWVNE01
      Text in Illustration
      *A except Sport Package *B for Sport Package
  18. REMOVE RADIATOR GRILLE

    Click here

  19. REMOVE LOWER NO. 1 RADIATOR GRILLE


    1. except Sport Package:


      1. Detach the 17 claws and remove the lower No. 1 radiator grille.

    2. for Sport Package:


      1. Detach the 18 claws and remove the lower No. 1 radiator grille.

        A01H27EE01
        Text in Illustration
        *A except Sport Package *B for Sport Package