REMOVE NO. 4 ENGINE ROOM WIRE
except Sport Package:
Disconnect the 6 connectors.
Detach the 7 clamps and remove the No. 4 engine room wire.
for Sport Package:
Disconnect the 6 connectors.
Detach the 11 clamps and remove the No. 4 engine room wire.
Detach the 2 claws and remove the clip.
Tech Tips
Use the same procedure to remove the clip on the other side.
REMOVE NO. 1 ULTRASONIC SENSOR
Remove the 6 No. 1 ultrasonic sensors as shown in the illustration.
Note
Be careful not to damage the retainer.
Do not forcibly remove the retainer from the bumper cover.
REMOVE NO. 1 ULTRASONIC SENSOR RETAINER
While heating the retainer using a dryer, pull the retainer lightly and remove the double-sided tape. Then remove the 4 No. 1 ultrasonic sensor retainers.
Heating temperature |
---|
40 to 60°C (104 to 140°F) |
CAUTION:
Be careful of burns.
Using a cloth or non-residue solvent, wipe off any tape residue on the bumper cover.
REMOVE NO. 2 ULTRASONIC SENSOR RETAINER
While heating the retainer using a dryer, pull the retainer lightly and remove the double-sided tape. Then remove the 2 No. 2 ultrasonic sensor retainers.
Heating temperature |
---|
40 to 60°C (104 to 140°F) |
CAUTION:
Be careful of burns.
Using a cloth or non-residue solvent, wipe off any tape residue on the bumper cover.
REMOVE HEADLIGHT CLEANER WASHER NOZZLE COVER
Extend the headlight washer nozzle.
REMOVE HEADLIGHT CLEANER HOSE
except Sport Package:
Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly LH.
Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly RH and drain the washer fluid.
Detach the 9 clamps and remove the headlight cleaner hose.
for Sport Package:
Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly LH and drain the washer fluid.
Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly RH and drain the washer fluid.
Detach the 9 clamps and remove the headlight cleaner hose.
REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH
Remove the screw and headlight washer actuator sub-assembly LH.
Detach the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration.
Remove the spring nut from the headlight washer actuator sub-assembly LH.
REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH
Tech Tips
Use the same procedure described for the LH side.
REMOVE ULTRASONIC SENSOR RETAINER
Tech Tips
Use the same procedure for both ultrasonic sensor retainers.
Remove the ultrasonic sensor retainer.
REMOVE ULTRASONIC SENSOR CLIP
Tech Tips
Use the same procedure for both ultrasonic sensor clips.
Remove the ultrasonic sensor clip.
REMOVE WASHER BRACKET
Tech Tips
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
except Sport Package:
Remove the washer bracket from the front bumper together with the double-sided tape.
Note
If the double-sided tape remains on the bumper, remove it completely.
The headlight cleaner bracket is a nonreusable part.
for Sport Package:
Remove the washer bracket from the front bumper together with the double-sided tape.
Note
If the double-sided tape remains on the bumper, remove it completely.
The washer bracket is a non-reusable part.
REMOVE FOG LIGHT ASSEMBLY LH
except Sport Package:
for Sport Package:
REMOVE FOG LIGHT ASSEMBLY RH
Tech Tips
Use the same procedure described for the LH side.
REMOVE FOG LIGHT COVER LH
except Sport Package:
Detach the 5 claws and remove the fog light cover LH.
for Sport Package:
Remove the screw.
Detach the 9 claws and remove the fog light cover LH.
*A | except Sport Package | *B | for Sport Package |
REMOVE FOG LIGHT COVER RH
Tech Tips
Use the same procedure described for the LH side.
REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET
for Type A:
Remove the 2 screws and front bumper extension mounting bracket.
*A | except Sport Package | *B | for Sport Package |
for Type B:
Remove the 2 screws and front bumper extension mounting bracket.
REMOVE FRONT BUMPER LOWER COVER
Detach the 2 claws and front bumper lower cover.
Rotate the cover forward as shown in the illustration.
*A | except Sport Package | *B | for Sport Package |
REMOVE RADIATOR GRILLE
REMOVE LOWER NO. 1 RADIATOR GRILLE
except Sport Package:
Detach the 17 claws and remove the lower No. 1 radiator grille.
for Sport Package:
Detach the 18 claws and remove the lower No. 1 radiator grille.
*A | except Sport Package | *B | for Sport Package |