DYNAMIC RADAR CRUISE CONTROL SYSTEM, Diagnostic DTC:C1A4A

DTC Code DTC Name
C1A4A Skid Control Buzzer Circuit

DESCRIPTION

The driving support ECU performs this by sending a sounding signal to the skid control ECU to sound the skid control buzzer.

When the skid control ECU detects a malfunction in the skid warning buzzer circuit, a malfunction signal is sent to the driving support ECU, and a DTC is output. Although the skid control ECU sends a malfunction signal to the driving support ECU, the ABS does not output a relevant malfunction detection DTC.

DTC Code DTC Detection Condition Trouble Area
C1A4A While power switch is ON (IG), skid control buzzer circuit malfunction signal is received by skid control ECU for 1 sec. or more

  • Skid control buzzer

  • Skid control buzzer circuit

  • Skid control ECU

  • Driving support ECU

INSPECTION PROCEDURE

PROCEDURE


  1. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (SKID CONTROL BUZZER)


    1. Using the intelligent tester, enter the following menus: Body / ABS/VSC/TRC / Active Test.

    2. Select "Buzzer", and perform the Active Test.

      OK
      Skid control buzzer sounds.

    NG

    GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM Click here

    OK

    REPLACE DRIVING SUPPORT ECU Click here