Click here

FUEL LID LOCK CONTROL CABLE ASSEMBLY (for 3 Door) INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


    1. for LHD:

      Attach the 12 clamps to install the fuel lid lock control cable.

    2. for RHD:

      Attach the 14 clamps to install the fuel lid lock control cable.

    3. A01DTXJ

      Install the lock retainer and turn it clockwise.

    4. A01DTYQ

      Install the cable and turn it clockwise as shown in the illustration.

  2. Click here

    INSTALL FRONT FLOOR CARPET ASSEMBLY


    1. for LHD:


      1. A01DR6N

        Return the front floor carpet to its original position and attach the 4 clamps.

    2. for RHD:


      1. A01DPJ1

        Return the front floor carpet to its original position and attach the 8 clamps.

  3. Click here

    INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. Connect the fuel lid lock control cable assembly to the fuel lid lock open lever sub-assembly.

    2. Attach the 3 claws to install the fuel lid control lever sub-assembly.

  4. Click here

    INSTALL DOOR SCUFF PLATE ASSEMBLY LH


    1. Attach the 4 clips, 10 claws and 2 guides to install the door scuff plate.

  5. Click here

    INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Tip:

    Use the same procedure described for the LH side.

  6. Click here

    INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH


    1. Attach the 4 claws and 2 guides and pass the rear No. 1 seat outer belt floor anchor through the rear quarter trim panel.

    2. Attach the 7 clips to install the rear quarter trim panel.

  7. Click here

    INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Attach the 9 claws and 11 clips to install the deck trim side panel.

    2. Install the 3 bolts and 2 screws.

    3. Install the rear No. 1 seat outer belt floor anchor with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf

    4. Install the front seat outer belt floor anchor with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf
  8. Click here

    INSTALL OUTER LAP BELT ANCHOR COVER

    Tip:

    Use the same procedure for the other outer lap belt anchor cover.


    1. Attach the 3 claws to install the outer lap belt anchor cover.

  9. Click here

    INSTALL QUARTER TRIM POCKET TRAY


    1. Attach the 6 claws and 2 guides to install the quarter trim pocket tray.

  10. Click here

    INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

    Tip:

    Use the same procedure for the other front deck side trim cover.


    1. Attach the 2 claws to install the front deck side trim cover.

  11. Click here

    INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    Tip:

    Use the same procedure for the other tonneau cover holder cap.


    1. Attach the 2 claws to install the tonneau cover holder cap.

  12. Click here

    INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Tip:

    Use the same procedure for the other No. 1 luggage compartment trim hook.


    1. Install the No. 1 luggage compartment trim hook so that it is positioned horizontally.

  13. Click here

    INSTALL REAR FLOOR CARPET ASSEMBLY


    1. Install the rear floor carpet.

  14. Click here

    INSTALL QUARTER TRIM COVER HOLE LH


    1. Attach the 2 claws and 2 guides to install the quarter trim cover hole.

  15. Click here

    INSTALL QUARTER TRIM COVER HOLE RH

    Tip:

    Use the same procedure described for the LH side.

  16. Click here

    INSTALL REAR FLOOR MAT REAR SUPPORT PLATE


    1. Attach the 6 claws to install the rear floor mat rear support plate.

    2. Install the 5 screws.

  17. Click here

    INSTALL MAT SET PLATE COVER

    Tip:

    Use the same procedure for all mat set plate covers.


    1. Attach the 2 claws to install the mat set plate cover.

  18. Click here

    INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Install the tonneau cover.

  19. Click here

    INSTALL REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 1 Seat)


    1. for LH Side:

      Install the rear No. 1 seat assembly (Click here).

    2. for RH Side:

      Install the rear No. 1 seat assembly (Click here).

  20. Click here

    INSTALL CONSOLE BOX ASSEMBLY (for RHD)


    1. for Automatic Transmission:

      Install the console box assembly (Click here).

    2. for Manual Transmission:

      Install the console box assembly (Click here).

    3. w/ Refrigerated Cool Box:

      Install the console box assembly (Click here).

  21. Click here

    INSTALL FRONT SEAT ASSEMBLY (for RHD)


    1. for Manual Seat:

      Install the front seat assembly (Click here).

    2. for Walk in Seat:

      Install the front seat assembly (Click here).

  22. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).