FRONT CONSOLE BOX (for Manual Transmission) INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL REAR CONSOLE BOX ASSEMBLY


    1. Connect each connector.

    2. Install the rear console box with the 2 screws, clip and 5 bolts.

  2. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Attach the 4 clips and 4 claws to install the rear console end panel.

  3. INSTALL NO. 1 CONSOLE BOX DUCT (for Single Air Conditioning System)


    1. Install the No. 1 console box duct with the clip.

  4. INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY (w/ Cool Box)


    1. Attach the 4 claws to install the No. 1 heater to register duct.

    2. Attach the 2 clamps.

  5. INSTALL CONSOLE PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Attach the 8 clips and 2 claws to install the console panel.

  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    A01DRLE

    1. Install the shift lever knob and twist it in the direction indicated by the arrow.

  7. INSTALL FRONT NO. 2 CONSOLE BOX INSERT


    1. Attach the 2 clips and guide to install the front No. 2 console box insert.

  8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Attach the 3 clips and 2 guides to install the No. 2 instrument panel under cover.

    2. Install the screw.

      A01DNTKE01
      Text in Illustration
      *A for LHD *B for RHD
  9. INSTALL FRONT NO. 1 CONSOLE BOX INSERT


    1. Attach the 2 clips and guide to install the front No. 1 console box insert.

  10. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. for LHD:


      1. Attach the 2 clips and 2 guides to install the No. 1 instrument panel under cover.

      2. Install the screw.

    2. for RHD:


      1. Attach the 3 clips and 2 guides to install the No. 1 instrument panel under cover.

      2. Install the screw.

  11. INSTALL FRONT CONSOLE UPPER PANEL GARNISH


    1. w/o Seat Heater System:


      1. Connect the connector.

      2. Attach the 5 clips to install the front console upper panel garnish.

    2. w/ Seat Heater System, w/ Climate Control Seat System:


      1. Connect each connector.

      2. Attach the 5 clips to install the front console upper panel garnish.

  12. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. Attach the 5 clips to install the No. 2 instrument panel finish panel cushion.

  13. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the 4 clips to install the instrument panel finish panel end LH.

  14. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Tech Tips

    Use the same procedure described for the No. 2 instrument panel finish panel cushion.

  15. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. Attach the 4 clips to install the instrument panel finish panel end RH.

  16. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. Connect the connector.

    2. Attach the 4 clips to install the integration control and panel assembly.