Click here

AUDIO AND VISUAL SYSTEM (for Radio and Display Type), Diagnostic DTC:B15F5

Click here
Click here Click here
DTC Code DTC Name
B15F5 Air Conditioner ECU Vehicle Information Reading/Writing Processor Malfunction
Click here

DESCRIPTION

This DTC is stored when items controlled by the air conditioning amplifier assembly cannot be customized via the audio and visual system vehicle customization screen (for Automatic Air Conditioning System).

Tip:

The air conditioning amplifier assembly controls the air conditioning system (for Automatic Air Conditioning System) related items that are customizable via the radio and display receiver assembly screen.

DTC Code DTC Detection Condition Trouble Area
B15F5 Air conditioning amplifier assembly vehicle setting processing error.

  • CAN communication system

  • Air conditioning system (for Automatic Air Conditioning System)

  • Air conditioning amplifier assembly

  • Radio and display receiver assembly
Click here

INSPECTION PROCEDURE

Tip:

When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).

Click here

PROCEDURE


  1. Click here

    CHECK CAN COMMUNICATION SYSTEM


    1. Use the GTS to check if the CAN communication system is functioning normally.


      OK
      CAN communication DTCs are not output.
      Table 1. Result
      Result Proceed to
      OK A
      NG (for LHD with Entry and Start System) B
      NG (for LHD without Entry and Start System) C
      NG (for RHD with Entry and Start System) D
      NG (for RHD without Entry and Start System) E

  2. Click here

    CHECK AIR CONDITIONING SYSTEM


    1. Check if the air conditioning system (for Automatic Air Conditioning System) is malfunctioning (Click here).

      Tip:

      Customization may not be possible depending on the malfunction in the air conditioning system (for Automatic Air Conditioning System).

      OK
      No malfunctions are present in the air conditioning system (for Automatic Air Conditioning System).

  3. Click here

    CHECK CUSTOMIZE ITEMS


    1. Display the "Vehicle Customization" screen.

    2. Make a note of the customizable items for the air conditioning system (for Automatic Air Conditioning System).

      Tip:

      These air conditioning system (for Automatic Air Conditioning System) items shown as customizable via the radio and display receiver assembly vehicle customization screen can also be changed using the GTS. In the following steps, the GTS will be used.


      1. To match-up the items in the radio and display receiver assembly with the items on the GTS, check the customize parameters list for the air conditioning system (for Automatic Air Conditioning System) related items that can be customized via the radio and display receiver assembly screen (Click here).

    3. Using the GTS, confirm that it is possible to change the settings of the air conditioning system (for Automatic Air Conditioning System) related customize parameters that are shown as customizable via the radio and display receiver assembly screen.

      OK
      The items available for customization via the radio and display receiver assembly screen can be customized successfully using the GTS.

  4. Click here

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLYClick here

  5. Click here

    GO TO CAN COMMUNICATION SYSTEMClick here

  6. Click here

    GO TO CAN COMMUNICATION SYSTEMClick here

  7. Click here

    GO TO CAN COMMUNICATION SYSTEMClick here

  8. Click here

    GO TO CAN COMMUNICATION SYSTEMClick here

  9. Click here

    GO TO AIR CONDITIONING SYSTEMClick here

  10. Click here

    REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLYClick here