HEIGHT CONTROL SENSOR INSTALLATION


  1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY


    1. Engage the clamp.

    2. Install the rear height control sensor sub-assembly with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Install the nut.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    4. Connect the connector.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

    Click here

  4. ADJUST HEADLIGHT AIMING

    Click here