FRONT SEAT ASSEMBLY INSTALLATION

INSTALL FRONT SEAT ASSEMBLY
1. Place the front seat assembly in the cabin.
  
  Note
  
  Be careful not to damage the vehicle body.
2. Connect the connectors under the seat.
3. Connect the cable to the negative (-) battery terminal.
  
  Note
  
  When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
4. Temporarily install the front seat assembly with the 4 bolts.
5. Operate the power seat switch knob and move the seat to the rearmost position.
6. Tighten the 2 bolts on the front side of the seat.
  
  Torque:
  
  37 N*m { 377 kgf*cm, 27 ft.*lbf }
  
  Tech Tips
  
  Tighten the bolts in the order indicated in the illustration.
7. Operate the power seat switch knob and move the seat to the foremost position.
8. Tighten the 2 bolts on the rear side of the seat.
  
  Torque:
  
  37 N*m { 377 kgf*cm, 27 ft.*lbf }
  
  Tech Tips
  
  Tighten the bolts in the order indicated in the illustration.
INSTALL REAR INNER SEAT TRACK BRACKET COVER
1. Engage the 2 claws and install the rear inner seat track bracket cover.
INSTALL REAR OUTER SEAT TRACK BRACKET COVER
1. Engage the 2 claws and install the rear outer seat track bracket cover.
INSTALL FRONT INNER SEAT TRACK BRACKET COVER
1. Operate the power seat switch knob and move the seat to the rearmost position.
2. Engage the 2 claws and install the front inner seat track bracket cover.
INSTALL FRONT OUTER SEAT TRACK BRACKET COVER
1. Engage the 2 claws and install the front outer seat track bracket cover.
INSTALL FRONT SEAT HEADREST ASSEMBLY
INSPECT SRS WARNING LIGHT

Tech Tips

Inspect the SRS warning light Click here.
INSPECT FRONT SEAT ASSEMBLY
1. Check the power seat operation.
2. Check the seat heater operation.
  1. Turn the engine switch on (IG).
  2. Turn the seat heater switch on.
  3. Wait 5 minutes or more and confirm that the seat surface becomes warm.