PARKING ASSIST MONITOR SYSTEM PRECAUTION

Note

When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.

System Name See Procedure
Parking Assist Monitor System

Click here


  1. POINTS TO NOTE WHEN SERVICING


    1. The maximum steering angle setting must be carried out with the engine running. Apply the parking brake, depress the brake pedal, move the shift lever to N, and ensure that the vehicle is not running.

    2. Pay attention to the following points when servicing:


      1. When disconnecting the battery cable, "SYSTEM INITIALIZING" appears on the screen. In this case, correct the steering angle neutral point Click here.

      2. When replacing the television camera ECU, "SYSTEM NOT READY" appears on the screen. In this case, set the maximum steering angle and steering angle neutral point, and adjust the line display position. In addition, when the television camera assembly is replaced or its position changes, readjustment of the line display position is required Click here.