INTEGRATION RELAY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE NO. 2 RELAY BLOCK COVER

  3. REMOVE INTEGRATION NO.1 RELAY


    1. A015YW1E01

      Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and pull up the integration relay.

    2. Disconnect the 3 connectors.