ENGINE OIL TEMPERATURE SENSOR INSTALLATION


  1. INSTALL OIL TEMPERATURE SENSOR


    1. A0160G0E02

      Using SST, install the oil temperature sensor with a new gasket.

      SST
      09922-10010
      Torque:
      without SST
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }
      Torque:
      with SST
      30 N*m  { 301 kgf*cm, 22 ft.*lbf }

      Note


      • The "with SST" torque value is effective when using SST with a fulcrum length of 52 mm (2.05 in.).

      • The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.) Click here.

      • The "with SST" torque value is effective when SST is parallel to the torque wrench.

      • Do not subject the oil temperature sensor to any impacts.

      • If the sensor is subjected to an impact, replace the oil temperature sensor with a new one.

      • Do not allow any moisture or foreign matter to enter the oil temperature sensor or its connector.

    2. Connect the oil temperature sensor connector.

  2. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Install the engine oil pressure switch assembly Click here.

  3. INSPECT FOR OIL LEAK