CLEARANCE WARNING BUZZER (for Front Side) REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. PRECAUTION

    CAUTION:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE COWL TOP VENTILATOR LOUVER RH

    A01GM4S

    1. Remove the 6 clips and cowl top ventilator louver RH.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    Click here

  5. REMOVE NO. 1 CLEARANCE WARNING BUZZER


    1. A01GNMK

      Detach the clamp.

    2. Disconnect the connector and remove the No. 1 clearance warning buzzer.