TELEPHONE ANTENNA INSTALLATION


  1. INSTALL TELEPHONE AND GPS ANTENNA


    1. When reusing the telephone and GPS antenna:


      1. Install a new seal.

    2. A01GJ7FE01

      Attach the 3 claws and 3 guides to install the telephone and GPS antenna as indicated by the arrows in the order shown in the illustration.

  2. INSTALL TELEPHONE AND GPS ANTENNA COVER


    1. A01GMLE

      Install the telephone and GPS antenna cover as shown in the illustration.

    2. A01GI5D

      Install a new washer and holder as shown in the illustration.

    3. Install the bolt.

      Torque:
      9.5 N*m  { 97 kgf*cm, 84 in.*lbf }

    4. Connect the connector.

  3. INSTALL ROOF HEADLINING ASSEMBLY


    1. for Standard Body:

      Click here

    2. for Long Body:

      Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSTALL COWL TOP VENTILATOR LOUVER RH


    1. A01GM4S

      for LHD:

      Install the 6 clips and cowl top ventilator louver RH.

      Note

      If the cowl top ventilator louver RH is not properly installed, water may leak into the engine room and cause malfunctions. Therefore, make sure the cowl top ventilator louver RH is installed properly.

    2. A01GI9P

      for RHD:

      Install the 6 clips and cowl top ventilator louver LH.

      Note

      If the cowl top ventilator louver LH is not properly installed, water may leak into the engine room and cause malfunctions. Therefore, make sure the cowl top ventilator louver LH is installed properly.

  6. CHECK SRS WARNING LIGHT

    Click here