HARD DISK DRIVE REMOVAL


  1. PRECAUTION

    CAUTION:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

    Note


    • Precautions for multi-media module receiver assembly and hard disc Click here.

  2. REMOVE COWL TOP VENTILATOR LOUVER RH

    A01GM4S

    1. Remove the 6 clips and cowl top ventilator louver RH.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    Click here

  5. REMOVE NO. 2 RADIO BRACKET


    1. A01GK0S

      Remove the 3 bolts and No. 2 radio bracket.

  6. REMOVE HARD DISC


    1. A01GHS1

      Remove the 2 screws.

    2. Detach the 2 claws and remove the cover.

    3. A01GJ22

      Remove the hard disc in the direction of the arrow shown in the illustration.