REAR PACKAGE TRAY SPEAKER INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL STEREO COMPONENT SPEAKER ASSEMBLY

    Note

    Do not touch the cone part of the speaker.


    1. Install the stereo component speaker assembly with the 4 bolts.

      A01GJVIE02
      Text in Illustration
      *A for Standard *B for 19 Speakers

      Tech Tips

      Install the bolts in the order shown in the illustration.

    2. Connect the connector.

  2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY


    1. w/ Rear Cooler:

      Connect the solar sensor connector.

    2. except 4-Passenger with Ottoman:

      Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly.

    3. for 4-Passenger with Ottoman:

      Pass the 2 rear seat belt floor anchors through the package tray trim panel assembly.

    4. Insert the rear part of the package tray trim panel assembly into the rear sunshade assembly.

    5. Attach the 2 clips to install the package tray trim panel assembly.

    6. except 4-Passenger with Ottoman:

      Attach the 4 claws to install the 3 belt guides.

    7. for 4-Passenger with Ottoman:

      Attach the 4 claws to install the 2 belt guides.

  3. INSTALL INNER ROOF SIDE GARNISH LH

    A01GK2ME06
    Text in Illustration
    *1 Clip A

    1. Install a new clip A to the inner roof side garnish LH.

    2. Attach the 2 claws and 5 clips to install the inner roof side garnish LH.

  4. INSTALL INNER ROOF SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL REAR SEAT SIDE GARNISH LH


    1. Attach the 6 claws to install the rear seat side garnish LH.

  6. INSTALL REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL REAR DOOR SCUFF PLATE LH


    1. for Standard Body:

      Click here

    2. for Long Body:

      Click here

  8. INSTALL REAR DOOR SCUFF PLATE RH


    1. for Standard Body:

      Click here

    2. for Long Body:

      Click here

  9. INSTALL REAR SEAT ASSEMBLY


    1. for Power Seat:

      Click here

    2. for Ottoman:

      Click here

    3. for Fixed Seat Type:

      Click here

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  11. INSTALL COWL TOP VENTILATOR LOUVER RH


    1. A01GM4S

      Install the 6 clips and cowl top ventilator louver RH.

      Note

      If the cowl top ventilator louver RH is not properly installed, water may leak into the engine room and cause malfunctions. Therefore, make sure the cowl top ventilator louver RH is installed properly.

  12. CHECK SRS WARNING LIGHT

    Click here