WASHER MOTOR REMOVAL


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE COWL TOP VENTILATOR LOUVER RH


    1. A01GM4S

      Remove the 6 clips and cowl top ventilator louver RH.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE FRONT WHEEL LH

  5. REMOVE FRONT FENDER MAIN SEAL LH


    1. A01GNTSE01

      Loosen the clip labeled A in the illustration, and then remove the 3 clips and front fender main seal LH.

      Tech Tips

      Clip A cannot be removed.

  6. REMOVE FRONT FENDER WHEEL OPENING MOULDING LH

    A01GJAY

    1. Remove the 5 screws.

    2. Detach the clip and remove the moulding.

  7. REMOVE FRONT FENDER LINER LH


    1. A01GIO7

      Remove the 15 screws, 6 clips and front fender liner LH.

  8. DRAIN WASHER FLUID


    1. A01GHWI

      Remove the washer hose from the windshield washer motor and pump, and drain the washer fluid.

  9. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A01GMHP

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly as shown in the illustration.

  10. REMOVE HEADLIGHT ASSEMBLY LH


    1. for HID Headlight assembly:

      Click here

    2. for LED Headlight assembly:

      Click here

  11. REMOVE WASHER INLET SUB-ASSEMBLY


    1. A01GK2X

      Remove the bolt and washer inlet.

  12. REMOVE WINDSHIELD WASHER JAR AND PUMP


    1. Disconnect the 3 connectors and detach the 4 clamps.

      A01GKOEE01

    2. Remove the 3 bolts. Then detach guide A and remove the windshield washer jar and pump.

  13. REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    1. A01GN31

      Remove the headlight cleaner motor and pump assembly together with the hose.

  14. REMOVE HEADLIGHT CLEANER CONTROL RELAY


    1. A01GKRK

      Detach the claw and remove the headlight cleaner control relay.

  15. REMOVE LEVEL WARNING SWITCH ASSEMBLY


    1. A01GMIT

      Remove the level warning switch assembly.