TIRE PRESSURE WARNING INITIATOR DRIVER (for RHD) REMOVAL


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  4. REMOVE TIRE PRESSURE MONITOR INITIATOR DRIVER


    1. A01GJ7I

      Disconnect the connectors.

    2. Remove the bolt, nut and tire pressure monitor initiator driver with bracket.

    3. A01GNCO

      Remove the 2 nuts and tire pressure monitor initiator driver.