TIRE PRESSURE WARNING INITIATOR DRIVER (for LHD) REMOVAL


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  4. REMOVE PASSENGER SIDE JUNCTION BLOCK

    A01GITT

    1. Disconnect the connectors.

    2. Remove the bolt, nut and passenger side junction block.

  5. REMOVE TIRE PRESSURE MONITOR INITIATOR DRIVER


    1. A01GIN4

      Disconnect the connectors.

    2. Remove the bolt, nut and tire pressure monitor initiator driver with bracket.

    3. A01GIJT

      Remove the nut and tire pressure monitor initiator driver.