ENGINE COOLANT TEMPERATURE SENSOR REMOVAL


  1. REMOVE INTAKE AIR CONNECTOR PIPE

    Click here

  2. DRAIN ENGINE COOLANT

    CAUTION:

    Do not remove the radiator reservoir cap and vent plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. Loosen the radiator drain cock plug.

      A01GLBYE01
      Text in Illustration
      *1 Radiator Drain Cock Plug *2 Radiator Reservoir Cap
      *3 Vent Plug *4 Cylinder Block Drain Cock Plug

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

    2. A01GN7SE02
      Text in Illustration
      *1 Vent Plug

      Remove the radiator reservoir cap, and using a 6 mm hexagon wrench, remove the vent plug.

    3. Drain coolant.

    4. Loosen the 2 cylinder block drain cock plugs.

  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. Disconnect the engine coolant temperature sensor connector.

    2. A01GILK

      Using a 19 mm ball joint lock nut wrench, remove the engine coolant temperature sensor and gasket.

    3. Remove the gasket from the engine coolant temperature sensor.