INTRUSION SENSOR REMOVAL


  1. PRECAUTION

    CAUTION:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE COWL TOP VENTILATOR LOUVER RH

    A01GM4S

    1. Remove the 6 clips and cowl top ventilator louver RH.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE MAP LIGHT ASSEMBLY


    1. for Standard Body:

      Click here

    2. for Long Body:

      Click here

  5. REMOVE THEFT WARNING RADAR SENSOR


    1. A01GJBX

      Remove the 2 screws.

    2. A01GM9H

      Disconnect the connector and remove the 4 screws.

    3. Detach the 4 clamps and remove the theft warning radar sensor.