SHOULDER BELT ANCHORAGE SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL HEIGHT ADJUSTABLE ANCHOR SWITCH

    A01GJCL

    1. Attach the 2 claws to install the height adjustable anchor switch.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. Connect the connector.

    2. A01GNLN

      Connect the 2 cables to the inside handle.

    3. Attach the 13 clips to install the front door trim board sub-assembly LH.

    4. Install the 3 screws.

  3. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


    1. Connect the connector.

    2. A01GHPZ

      Attach the 2 claws to install the power window regulator master switch assembly with front door armrest base panel.

  4. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH


    1. Attach the 3 claws to install the front door inside handle bezel plug LH.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. INSTALL COWL TOP VENTILATOR LOUVER RH


    1. A01GM4S

      for LHD:

      Remove the 6 clips and cowl top ventilator louver RH.

    2. A01GI9P

      for RHD:

      Remove the 6 clips and cowl top ventilator louver LH.