CHILD RESTRAINT SEAT ANCHOR BRACKET INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY

    A01GHV2

    1. for 4-Passenger with Ottoman:


      1. for Passenger Side:

        Install the child restraint seat anchor bracket sub-assembly with the 2 bolts.

        Torque:
        33 N*m  { 337 kgf*cm, 24 ft.*lbf }
      2. A01GLP2

        for Driver Side:

        Install the child restraint seat anchor bracket sub-assembly with the bolt.

        Torque:
        33 N*m  { 337 kgf*cm, 24 ft.*lbf }
    2. A01GLP2

      except 4-Passenger with Ottoman:

      Align the claw with the positioning hole and install the 2 child restraint seat anchor bracket sub-assemblies with the 2 bolts.

      Torque:
      33 N*m  { 337 kgf*cm, 24 ft.*lbf }

  2. INSTALL INNER CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY

    A01GKFME01

    1. except 4-Passenger with Ottoman:


      1. Align the hole with the positioning pin and install the 2 inner child restraint seat anchor bracket sub-assemblies with the 2 bolts.

        Torque:
        33 N*m  { 337 kgf*cm, 24 ft.*lbf }
    2. A01GKFME01

      for 4-Passenger with Ottoman:

      Align the hole with the positioning pin and install the inner child restraint seat anchor bracket sub-assembly with the bolt.

      Torque:
      33 N*m  { 337 kgf*cm, 24 ft.*lbf }

  3. INSTALL REAR SEAT ASSEMBLY


    1. for Power Seat:

      Click here

    2. for Ottoman:

      Click here

    3. for Fixed Seat Type:

      Click here