STARTER (for 2.0 kW Type) INSTALLATION


  1. INSTALL STARTER ASSEMBLY


    1. A01BEF3E01

      Install the starter with the bolt and 2 nuts.

      Torque:
      68 N*m  { 693 kgf*cm, 50 ft.*lbf }
    2. A01BBCCE01

      Connect the wire harness to terminal 30 and install the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    3. Close the terminal cap.

    4. Connect the terminal 50 connector to the starter assembly.

    5. A01BG1IE01

      for Wide body:

      Install the ground cable with the bolt.

      Torque:
      25 N*m  { 250 kgf*cm, 18 ft.*lbf }

  2. INSTALL TRANSMISSION CONTROL CABLE BRACKET NO.1 (for Automatic Transmission)


    1. A01BFFD

      Install the transmission control cable bracket No.1 to the automatic transmission assembly with the 2 bolts.

      Torque:
      28 N*m  { 286 kgf*cm, 21 ft.*lbf }

  3. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY (for Automatic Transmission)


    1. A01BDE0E02

      Fix the transmission control cable assembly to the control cable bracket with a clip.

    2. Install the transmission control cable assembly to the control shaft lever with the nut.

      Torque:
      15 N*m  { 150 kgf*cm, 11 ft.*lbf }

  4. INSTALL ENGINE SIDE UNDER COVER LH (w/ Engine Side Under Cover LH)

    Torque:
    13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  5. INSTALL ENGINE SIDE UNDER COVER RH (w/ Engine Side Under Cover RH)

    Torque:
    13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  6. INSTALL ENGINE UNDER COVER NO.2 (w/ Engine Under Cover No.2)

    Torque:
    13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  7. CONNECT NEGATIVE BATTERY CABLE

  8. PERFORM INITIALIZATION


    1. Some system need initialization when reconnecting the battery cable. Click here