VENTURI INSTALLATION


  1. INSTALL VENTURI ASSEMBLY


    1. Install a new gasket and venturi.

    2. A01BFXZE01

      Connect the throttle control motor connector.

    3. A01BAY2E01

      Connect the throttle open switch connector.

  2. INSTALL INTAKE AIR CONNECTOR SUB-ASSEMBLY


    1. A01BCJN

      Install a new gasket and intake air connector with the bolt and 3 nuts.

      Torque:
      bolt
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }
      Nut
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

    2. Connect the turbo pressure sensor connector.

    3. Connect the ventilation hose.

  3. CONNECT AIR CLEANER HOSE NO.2


    1. Install the air cleaner hose No.2 with the clamp.

  4. REMOVE CABLE TO NEGATIVE BATTERY TERMINAL

  5. PERFORM INITIALIZATION

    Click here