ECD SYSTEM PRECAUTION


  1. INITIALIZATION

    Note

    When the negative (-) battery cable is disconnected, initialize the following systems after the cable is reconnected.

    System Name See Procedure
    Power Window Control System

    Click here

    Tech Tips

    Initialization can not be completed by only disconnecting the battery cable.

  2. FOR USING INTELLIGENT TESTER

    CAUTION:


    • Observe the following items for safety reasons:


    • Read the tester's instructions prior to use.

    • Prevent the tester cable from being caught on the pedals, shift lever and steering wheel when driving with the tester connected to the vehicle.

    • When driving the vehicle with tester connected, ensure that one is driving the vehicle, and the other operates the tester.

  3. FOR USING BATTERY DURING INSPECTION


    • While using the battery during inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.