INTAKE AIR TEMPERATURE SENSOR INSTALLATION


  1. INSTALL INTAKE AIR TEMPERATURE SENSOR


    1. A01BDAX

      Install a new gasket and the intake air temperature sensor.

      Torque:
      34 N*m  { 350 kgf*cm, 25 ft.*lbf }
    2. A01BBVC

      Connect the intake air temperature sensor connector.

  2. INSTALL NO. 2 ENGINE SERVICE HOLE COVER


    1. A01BD0S

      Install the No. 2 engine service hole cover with the 3 bolts.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  4. PERFORM INITIALIZATION


    1. Perform initialization procedures Click here.

      Note

      Certain systems need to be initialized after reconnecting the cable to the negative (-) battery terminal.