CAMSHAFT POSITION SENSOR INSTALLATION


  1. INSTALL CAMSHAFT POSITION SENSOR

    A01BE2P

    1. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

    2. A01BERQ

      Install the camshaft position sensor with the bolt.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note

      Do not crack or jam the O-ring when installing the camshaft position sensor.

    3. Connect the camshaft position sensor connector.

  2. INSTALL VANE PUMP OIL RESERVOIR ASSEMBLY

    A01BBMO

    1. Install the vane pump oil reservoir assembly with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  4. PERFORM INITIALIZATION


    1. Perform initialization procedures Click here.

      CAUTION:

      Certain systems need to be initialized after reconnecting the cable to the negative (-) battery terminal.