INJECTOR DRIVER (w/o DPF) INSTALLATION


  1. INSTALL INJECTOR DRIVER

    A01BF9G

    1. Install the injector driver with the 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the 2 injector driver connectors.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  3. INSTALL BATTERY SERVICE HOLE COVER

  4. PERFORM INITIALIZATION


    1. Perform initialization procedures Click here.

      Note

      Certain systems need to be initialized after reconnecting the cable to the negative (-) battery terminal.