DRIVE BELT INSTALLATION


  1. INSTALL FAN & GENERATOR V BELT (w/o Air Conditioning)


    1. A01BBR9E01

      Install the V belt.

    2. Using a bar, adjust the tension of the V belt.

    3. Tighten the bolts A and B.

      Torque:
      Bolt A
      75 N*m  { 765 kgf*cm, 55 ft.*lbf }
      Bolt B
      18 N*m  { 185 kgf*cm, 13 ft.*lbf }

    4. Check the tension of the V belt. Click here

  2. INSTALL FAN & GENERATOR V BELT (w/ Air Conditioning)


    1. A01BAGHE01

      Install the V belt.

    2. Tightening the bolt C, adjust the tension of the V belt.

    3. Tighten the bolts A and B.

      Torque:
      Bolt A
      75 N*m  { 765 kgf*cm, 55 ft.*lbf }
      Bolt B
      18 N*m  { 185 kgf*cm, 13 ft.*lbf }

    4. Check the tension of the V belt. Click here

  3. INSTALL V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1 (w/ Air Conditioning)


    1. A01BEBYE01

      Install the V belt.

    2. Tightening the bolt B, adjust the tension of the V belt.

    3. Tighten nut A.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

    4. Check the tension of the V belt. Click here

  4. INSTALL VANE PUMP V BELT


    1. A01BCBTE01

      Install the V belt.

    2. Using a bar, adjust the tension of the V-ribbed belt.

    3. Tighten the bolt A and nut B.

      Torque:
      Bolt (A)
      48 N*m  { 489 kgf*cm, 35 ft.*lbf }
      Nut (B)
      64 N*m  { 635 kgf*cm, 47 ft.*lbf }

    4. Check the tension of the V belt. Click here

  5. INSTALL ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY


    1. Install the 5 bolts and engine service hole cover.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  6. INSTALL FRONT DOOR SCUFF PLATE RH

  7. INSTALL FRONT SEAT ASSEMBLY RH (for Hi-back Seat Type)

    Click here

  8. INSTALL FRONT SEAT ASSEMBLY RH (for Low-back Seat Type)

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  10. PERFORM INITIALIZATION

    Some systems need initialization when reconnecting the battery cable. Click here