LOWER INSTRUMENT PANEL REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

All bolts, screws and nuts relevant to installing and removing the instrument panel are shown, along with their alphabetic codes, in the table below.

A01VKENE01

PROCEDURE


  1. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  2. REMOVE FRONT DOOR SCUFF PLATE RH (for 5 Door)

    Click here

  3. REMOVE FRONT DOOR SCUFF PLATE LH (for 5 Door)

    Tech Tips

    Use the same procedure as for the RH side.

  4. REMOVE FRONT DOOR SCUFF PLATE RH (for 3 Door)

    Click here

  5. REMOVE FRONT DOOR SCUFF PLATE LH (for 3 Door)

    Tech Tips

    Use the same procedure as for the RH side.

  6. REMOVE COWL SIDE TRIM BOARD RH

    Click here

  7. REMOVE COWL SIDE TRIM BOARD LH

    Tech Tips

    Use the same procedure as for the RH side.

  8. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


    1. A01VEWH

      Disengage the claw to separate the glove compartment door stopper sub-assembly from the glove compartment door assembly.

    2. Slightly flex the upper part of the glove compartment door assembly to release the 2 stoppers and open the glove compartment door assembly until it is horizontal.

    3. A01VGHSE02
      Text in Illustration
      *a Hinge
      *b Guide

      Pull the glove compartment door assembly out horizontally to disengage the 2 hinges and 3 guides to remove the glove compartment door assembly.

      Note

      Pull the glove compartment door assembly out horizontally. Otherwise, the hinge may be damaged, making re-installation impossible.

  9. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01VKPI

      Disengage the 3 claws and guide to remove the No. 2 instrument panel under cover sub-assembly.

    2. w/ Footwell Light:


      1. Disconnect the connector.

  10. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01VGJY

      Remove the 2 <A> screws.

    2. Disengage the 2 claws and guide to remove the No. 1 instrument panel under cover sub-assembly.

    3. w/ Footwell Light:


      1. Disconnect the connector.

  11. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


    1. for LHD:


      1. A01VI04

        Disengage the 5 clips, 2 claws and guide to remove the No. 2 instrument panel finish panel.

    2. for RHD:


      1. A01VKLO

        Disengage the 6 clips and 2 claws to remove the No. 2 instrument panel finish panel.

  12. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag)


    1. for LHD:


      1. A01VKB0

        Disengage the 2 clips and 5 claws to remove the lower instrument panel finish panel

    2. for RHD:


      1. A01VF9N

        Disengage the 2 clips and 6 claws to remove the lower instrument panel finish panell

  13. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)

    Click here

  14. REMOVE STEREO OPENING COVER WITH BRACKET (w/o Radio Receiver)


    1. A01VJMI

      Remove the 4 screws and stereo opening cover with bracket.

  15. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)

    Click here

  16. SEPARATE AIR CONDITIONING PANEL ASSEMBLY (for Manual Air Conditioning System)

    Click here

  17. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

    Click here

  18. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY (w/o Cover)

    Click here

  19. REMOVE SPARE SWITCH HOLE COVER (w/ Cover)


    1. A01VFRY

      Disengage the 2 claws to remove the spare switch hole cover.

  20. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY (w/ Power Outlet Socket)

    Click here

  21. REMOVE NO. 1 POWER OUTLET SOCKET COVER (w/ Power Outlet Socket)

    Click here

  22. REMOVE CIGARETTE LIGHTER ASSEMBLY (w/ Cigarette Lighter)

    Click here

  23. REMOVE CIGARETTE LIGHTER BEZEL STAY (w/ Cigarette Lighter)

    Click here

  24. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  25. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A01VFOI

      Disengage the claw and 2 guides to separate the hood lock control lever sub-assembly.

  26. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. A01VGIB

      Disengage the 2 claws to disconnect the DLC3 connector.

    2. Disengage the clamps.

    3. Disconnect the connectors.

    4. Remove the 6 <B> or <C> bolts, <D> or <E> screw and 2 <F> bolts from the lower instrument panel sub-assembly.

      A01VEZWE02
      *1 <B> or <C>
      *2 <D> or <E>

    5. Disengage the 10 guides to remove the lower instrument panel sub-assembly.

      A01VEDX