REAR SEAT OUTER BELT ASSEMBLY(for 5 Door) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.

PROCEDURE


  1. REMOVE REAR SEAT ASSEMBLY (for LH Side)

    Click here

  2. REMOVE REAR SEAT ASSEMBLY (for RH Side)

    Click here

  3. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)

    Click here

  4. REMOVE SPARE WHEEL COVER (w/ Cover)

    Click here

  5. REMOVE NO. 2 ROOM LIGHT ASSEMBLY (for LH Side)

    Click here

  6. REMOVE JACK HANDLE (for RH Side)

  7. REMOVE REAR FLOOR FINISH PLATE

    Click here

  8. REMOVE REAR DOOR SCUFF PLATE

    Click here

  9. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

    Click here

  10. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

    Click here

  11. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)

    Click here

  12. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)

    Click here

  13. REMOVE ROOF SIDE INNER GARNISH

    Click here

  14. REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY


    1. A000FHP

      Remove the bolt to disconnect the shoulder anchor part of the rear seat 3 point type outer belt assembly.

    2. A000HTL

      Remove the bolt, disengage the 2 hooks to remove the rear seat 3 point type outer belt assembly.