DOOR CONTROL RECEIVER(for 5 Door) INSTALLATION

PROCEDURE

1. INSTALL DOOR CONTROL RECEIVER

   
   

   1. Engage the 2 hooks.

   2. Install the door control receiver with the bolt.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   3. Connect the connector.

2. INSTALL ROOF SIDE INNER GARNISH LH

   Tech Tips

   Use the same procedure as for the RH side Click here.

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Tech Tips

   Use the same procedure as for the RH side Click here.

4. INSTALL NO. 2 ROOM LIGHT ASSEMBLY

   Click here

5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

   
   

   1. Install the rear door opening trim weatherstrip LH.

6. INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

   Tech Tips

   Use the same procedure as for the RH side Click here.

7. INSTALL REAR FLOOR FINISH PLATE

   Click here

8. INSTALL REAR DOOR SCUFF PLATE LH

   Tech Tips

   Use the same procedure as for the RH side Click here.

9. INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

   Click here

10. INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

    Click here

11. INSTALL SPARE WHEEL COVER (for TMMF Made)

    Click here

12. INSTALL DECK BOARD ASSEMBLY

    Click here