PROCEDURE
INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER
Engage the 2 tabs into the holes to temporarily install the tire pressure warning ECU and receiver.
Install the bolt.
| 8.3 N*m | 85 kgf*cm | 73 in.*lbf |
Connect the connector to the tire pressure warning ECU and receiver.
INSTALL ROOF SIDE INNER GARNISH LH (for 5 Door)
Use the same procedure as for the RH side (Click here).
INSTALL ROOF SIDE INNER GARNISH LH (for 3 Door)
Use the same procedure as for the RH side (Click here).
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for 5 Door)
Use the same procedure as for the RH side (Click here).
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for 3 Door)
Use the same procedure as for the RH side (Click here).
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH (for 5 Door)
Use the same procedure as for the RH side (Click here).
INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH (for 3 Door)
Use the same procedure as for the RH side (Click here).
INSTALL REAR FLOOR FINISH PLATE
INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH (for 3 Door)
Use the same procedure as for the RH side (Click here).
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH (for 5 Door)
Install the rear door opening trim weatherstrip LH.
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for 3 Door)
Install the front door opening trim weatherstrip LH.
INSTALL REAR DOOR SCUFF PLATE LH (for 5 Door)
Use the same procedure as for the RH side (Click here).
INSTALL FRONT DOOR SCUFF PLATE LH (for 3 Door)
Use the same procedure as for the RH side (Click here).
INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)
INSTALL SPARE WHEEL COVER (w/ Cover)
INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)
REGISTER TRANSMITTER ASSEMBLY ID
INSPECT TIRE PRESSURE WARNING SYSTEM
PERFORM INITIALIZATION