CLUTCH MASTER CYLINDER(for LHD) REMOVAL

PROCEDURE


  1. REMOVE BRAKE BOOSTER ASSEMBLY (for TMC Made)

    Click here

  2. REMOVE BRAKE BOOSTER ASSEMBLY (for TMMF Made)

    Click here

  3. REMOVE CLUTCH RESERVOIR TUBE


    1. A00498O

      Slide the clip and remove the clutch reservoir tube from the clutch master cylinder assembly.

      Tech Tips

      Use a container to collect the fluid.

  4. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE


    1. A0047VR

      Using a union nut wrench (10 mm), disconnect the clutch master cylinder to flexible hose tube from the clutch master cylinder assembly.

      Tech Tips

      Use a container to collect the fluid.

  5. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


    1. A0048PY

      Push the clutch master cylinder push rod clevis upward and release it toward the left side of the vehicle.

    2. A0049HR

      Remove the 2 nuts and the clutch master cylinder assembly.

  6. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS


    1. A0049LRE04
      Text in Illustration
      *1 Lock Nut
      *2 Clutch Master Cylinder Push Rod Clevis

      Measure the dimension A as shown in the illustration before loosening the lock nut.

    2. Loosen the lock nut and remove the clutch master cylinder push rod clevis from the push rod.

      Note

      When loosening the lock nut, be sure to hold the clevis in place by its square or hexagonal portion.

    3. Remove the lock nut from the push rod.