DRIVING SUPPORT ECU(for LHD) INSTALLATION

PROCEDURE

1. INSTALL DRIVING SUPPORT ECU ASSEMBLY

   
   

   1. Install the driving support ECU assembly to the driving support ECU bracket with the 2 nuts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Install the driving support ECU assembly to the instrument panel reinforcement and the power steering ECU assembly with the bolt and the nut.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   3. Engage the wire harness clamp to the driving support ECU bracket.

   4. Connect the connector to the driving support ECU assembly.

2. INSTALL COMBINATION METER ASSEMBLY

   Click here