DRIVING SUPPORT ECU(for RHD) INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL DRIVING SUPPORT ECU ASSEMBLY

   
   

   1. Install the driving support ECU assembly to the driving support ECU bracket with the 2 nuts.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

   2. Install the driving support ECU assembly to the instrument panel reinforcement and the power steering ECU assembly with the bolt and the nut.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

   3. Engage the wire harness clamp to the driving support ECU bracket.

   4. Connect the connector to the driving support ECU assembly.

2. Click here

   INSTALL COMBINATION METER ASSEMBLY

   (Click here)