VACUUM SENSOR REMOVAL

PROCEDURE


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  2. REMOVE FRONT AIR SHUTTER SEAL RH


  3. REMOVE FRONT NO. 1 VENTILATOR SEAL


  4. REMOVE INNER COWL TOP TO COWL BRACE


  5. REMOVE OUTER COWL TOP PANEL


  6. REMOVE VACUUM SENSOR ASSEMBLY


    1. Disconnect the vacuum sensor assembly connector.

    2. B0045ZFC01
      *A for LHD
      *B for RHD

      Remove the vacuum sensor assembly from the brake booster assembly.

    3. Remove the grommet from the brake booster assembly.