VACUUM SWITCHING VALVE REMOVAL

PROCEDURE

1. REMOVE WINDSHIELD WIPER MOTOR AND LINK

   Click here

2. REMOVE FRONT NO. 1 VENTILATOR SEAL (for LHD)

   Click here

3. REMOVE FRONT NO. 1 VENTILATOR SEAL (for RHD)

   Click here

4. REMOVE FRONT AIR SHUTTER SEAL RH (for LHD)

   Click here

5. REMOVE FRONT AIR SHUTTER SEAL RH (for RHD)

   Click here

6. REMOVE INNER COWL TOP TO COWL BRACE (for LHD)

   Click here

7. REMOVE INNER COWL TOP TO COWL BRACE (for RHD)

   Click here

8. REMOVE OUTER COWL TOP PANEL (for LHD)

   Click here

9. REMOVE OUTER COWL TOP PANEL (for RHD)

   Click here

10. REMOVE NO. 2 VACUUM SWITCHING VALVE ASSEMBLY

    
    

    1. 

       Disconnect the No. 2 vacuum switching valve assembly connector.

    2. Disengage the clamp to separate the wire harness.

    3. Loosen the 2 hose clips and disconnect the No. 1 air hose and No. 2 air hose from the No. 2 vacuum switching valve assembly.

    4. Disengage the clamp to remove the No. 2 vacuum switching valve assembly.