POWER STEERING ECU(for RHD) INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL POWER STEERING ECU ASSEMBLY

   
   

   1. Install the power steering ECU assembly with the 2 nuts.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

   2. Connect the 4 connectors.

   3. Engage the wire harness clamp.

2. Click here

   INSTALL COMBINATION METER ASSEMBLY

   (Click here)

3. Click here

   TORQUE SENSOR ZERO POINT CALIBRATION

   (Click here)

4. Click here

   ASSIST MAP WRITING

   (Click here)