VACUUM SENSOR REMOVAL

PROCEDURE

1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here

2. REMOVE FRONT NO. 1 VENTILATOR SEAL

   Click here

3. REMOVE FRONT AIR SHUTTER SEAL RH

   Click here

4. REMOVE INNER COWL TOP TO COWL BRACE

   Click here

5. REMOVE OUTER COWL TOP PANEL

   Click here

6. REMOVE VACUUM SENSOR ASSEMBLY

   
   

   1. Disconnect the vacuum sensor assembly connector.

   2. 

      Remove the vacuum sensor assembly from the brake booster assembly.

   3. Remove the grommet from the brake booster assembly.