REAR BUMPER INSTALLATION

PROCEDURE


  1. INSTALL REAR BUMPER ASSEMBLY


    1. Connect the connector.

    2. B004WBXC02
      B004RMI Install in this Direction

      Attach the claw to install the rear bumper assembly as shown in the illustration.

    3. B004VR3C02
      B004RMI Install in this Direction

      Attach the claw.

      Tech Tips

      Use the same procedure for the RH and LH side.

    4. B004UPC

      Install the 2 screws.

    5. B004S9C

      Install the 8 clips.

    6. B004S0L

      Install the screw.

      Tech Tips

      Use the same procedure for the RH and LH side.

    7. B004TFN

      Install the 3 clips.

      Tech Tips

      Use the same procedure for the RH and LH side.

  2. INSTALL REAR COMBINATION LIGHT COVER LH


    1. B004TU2C01
      B004RMI Install in this Direction

      Attach the claw and install the rear combination light cover LH.

    2. B004XRVC01
      B004RMI Install in this Direction

      Attach the claw as shown in the illustration.

  3. INSTALL REAR COMBINATION LIGHT COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Hands Free Power Trunk Lid)

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Hands Free Power Trunk Lid)

    Click here

  6. INITIALIZE POWER TRUNK LID CONTROL SYSTEM

    Tech Tips

    When the luggage compartment door is opened using a mechanical key.

    Click here

  7. PERFORM CALIBRATION

    Click here